We already replaced this kind of system with a DTX200 emulator:
8" drive : SHUGART SA850, CDC BRB8A, YE DATA...5.1/4" drive : - Full-height : SHUGART SA400, MPI 92S, TANDON TM100...
- Half-height : TEAC (FD-05xx, FD-55xx), EPSON (SD-681L), ...
3.1/2" drive : ALPS (AL FD 7xx), PANASONIC (JU-25xxx), SONY (MPF-520xx, MPF- 920xx), YE DATA : YD-702D, TEAC FD-235GF, FD235HG, etc ...iRMX86 Sytems: INTEL, WESTINGHOUSE, etc..DEC: PDP11, VAX, MICROVAX I & II, etc..NEC: PC 98XXTajima TMFX II-C, TMFX III/III-C, TTMEX-C901/1201, TMEX-C101, TMFXIV, TMLH, TMCE-601, TMCE-602/604, TMCE-60902/61202.Brother BAS-401, 410, 411, 412, 412A, 416, 416A, 423, 423A, BAS-47, BES-110AF, 111AF, 1210AC, 1230AC, BE-12030, BAS-40, BAS-45, BAS-46, BAS-304, 304-A, 310, 311, 311A, 314A, 315A, 326, 326A, 340, 341A, 342A, 343A, 364, 366, 370, 375, 750, 751, 752, 753, 754, 755, 760.ZSK MSCM, MSCD, MSCC, MSCA, MSCI, MSCF, MSCL. SODIK ABB S3, IRB 1500KUKASTAUBLIFANUCIGM ROBOTICHITACHI B16CLOSS RobotsFLUKE Robots
So if you have a similar or an identical system, you can be sure that the DTX200 emulator works with it.
EASY INSTALLATION
The DTX 200 uses as much space as a 3 '' floppy disk. It will be mechanically adapted for your larger ones.The DTX-200 is pre-programmed to have the same features with the floppy drive to replace. it not need any software to be functionnal. You receive it ready to work. Each floppy disk drive using a specific connection technology, an adapter card will be developed for. It only has to be connected in place of the replaced floppy drive in a completely transparent way for the system.
It is also possible to copy floppy disk, using a working floppy drive, to the CompactFlash© through the DTX-200. To do this, Datex designs an unit to copy bit-per-bit the data, including the format.
Most of floppy disk drive are no longer manufactured.The few still manufactured ones use new connection technologies. Therefore, users have their floppy disk drives replaced by second hand ones, less and less reliable.
Datex-DSM worried about the everlastingness of these systems, has developed the DTX-200 floppy drive replacement (MFM) in order for these customers to recover the reliability of their device.
1/2
DETAILED SPECIFICATIONS
Can replace all flopy drive sizes (8" 5.1/4" 3.1/2")
Uses a COMPACT FLASH Card
Same size as a 3.5" (physical adaptation possible
for other formats)
POWER SUPPLY AND USE
J1 power connector (floppy drive type): 5V supplyStarting and operational in less than 10 secondsLED display for: drive select, seek, write protect, high densityButton to select the diskette in the CF cardDual-function button: Approving the selection of the diskette (push strongly), going back to the initial counter adresse (push low)Automatic backup for each accessIRMX86 INTEL, WESTINGHOUSE, DEC MICROVAX, NEC PC 98XX Fears neither vibration or dustHave a system for prevent failureCan emulate up to 99 diskettes (in option)2 years warrantyCOMPATIBILITY
JOEMARS
CALCOMP
NC DATADRIVE