The DTX2100ST is SCSI hard disk drive emulator which can emulate all existing SCSI hard disk drive. If your system uses an old SCSI disk drive, you can replace it by our DTX2100ST which uses a SSD to replace your SCSI. Heat and crash are real problems with SCSI disk and a lot of our client lost important data after a SCSI disk breakness. With the DTX2100ST, you can replace your SCSI disk with ecactly the same features as the old disk, and your systems will not make the difference. Just you replace your SCSI and just you can be sure that your data are in safety.
Features of the DTX2100ST
INTERFACE:
SCSI 50, 80 or 68 PINS
Selectable SCSI ID from 0 to 7 (50 PINS mode)
Selectable SCSI ID from 0 to 15 (68 & 80 PINS mode)
SCSI RAID CARD compatible
DIMENSIONS:
3.5" 146*101*25 mm
CAPACITY:
80 MB to 256 GB
SPEED:
sequential read min: 10MB/s max: 200MB/s
sequential write min: 8MB/s max: 200MB/s
RELIABILITY:
estimated write endurance: >80 years (for 10Go write/day)
estimated read endurance: unlimited
MTBF (Mean Time Between Failure): 1 000 000 hours
List of DTX2100ST emulated disk:
When you are entered in a list, make right click and then click "back" (or similar) to go back on the depart list.
List of every emulated disk
